Gian Lorenzo Bernini's Outdoor Fountains

Gian Lorenzo Bernini's Outdoor FountainsGian Lorenzo Bernini's Outdoor Fountains 408307025983592.jpg There are many celebrated water fountains in Rome’s city center. Practically all of them were designed, architected and built by one of the greatest sculptors and artists of the 17th century, Gian Lorenzo Bernini. Traces of his life's work are obvious all through the roads of Rome because, in addition to his skills as a fountain designer, he was also a city builder. A famous Florentine sculptor, Bernini's father guided his young son, and they ultimately went to Rome to thoroughly exhibit their art, mainly in the form of community water fountains and water fountains. An exemplary workman, Bernin received compliments and the patronage of popes and important painters. His sculpture was originally his claim to popularity. He made use of his knowledge and melded it seamlessly with Roman marble, most notably in the Vatican. Though he was influenced by many, Michelangelo had the most serious effect on him, both personally and professionally.

The Original Water Garden Fountains of the Historical Past

Original Water Garden Fountains Historical Past 5183834992.jpg The Original Water Garden Fountains of the Historical Past Towns and communities relied on functional water fountains to funnel water for cooking, bathing, and cleaning up from nearby sources like ponds, streams, or creeks. Gravity was the power source of water fountains up until the end of the nineteenth century, using the forceful power of water traveling down hill from a spring or creek to push the water through valves or other outlets. The beauty and wonder of fountains make them appropriate for traditional monuments. When you encounter a fountain today, that is definitely not what the very first water fountains looked like. Uncomplicated stone basins created from nearby stone were the original fountains, used for religious purposes and drinking water. The initial stone basins are thought to be from around 2000 BC. Gravity was the power source that controlled the initial water fountains. The location of the fountains was influenced by the water source, which is why you’ll normally find them along reservoirs, canals, or rivers. The Romans began creating ornate fountains in 6 BC, most of which were bronze or stone masks of creatures and mythological representations. The remarkable aqueducts of Rome provided water to the eye-catching public fountains, most of which you can go see today.

Rome’s First Water Delivery Solutions

Rome’s First Water Delivery Solutions Aqua Anio Vetus, the first raised aqueduct founded in Rome, started delivering the many people living in the hills with water in 273 BC, although they had relied on natural springs up till then. If residents living at higher elevations did not have access to springs or the aqueduct, they’d have to rely on the other existing solutions of the day, cisterns that accumulated rainwater from the sky and subterranean wells that drew the water from below ground. Starting in the sixteenth century, a unique strategy was introduced, using Acqua Vergine’s subterranean segments to generate water to Pincian Hill. During its initial construction, pozzi (or manholes) were located at set intervals along the aqueduct’s channel.Rome’s First Water Delivery Solutions 197469982169774827.jpg Whilst these manholes were created to make it less difficult to manage the aqueduct, it was also feasible to use buckets to remove water from the channel, which was practiced by Cardinal Marcello Crescenzi from the time he acquired the property in 1543 to his passing in 1552. Reportedly, the rainwater cistern on his property wasn’t enough to fulfill his needs. Through an opening to the aqueduct that ran underneath his property, he was set to reach his water desires.

The One Cleaning Solution to NEVER Use On Your Large Outdoor Fountains

The One Cleaning Solution to NEVER Use On Your Large Outdoor Fountains Appropriate care and regular cleaning are important to the longevity of water fountains. It is easy for foreign items to find their way into open-air fountains, so keeping it clean is vital. Additionally, anywhere light from the sun mixes with still water, algae can form. Either sea salt, hydrogen peroxide, or vinegar can be dissolved into the water to eliminate this issue.One Cleaning Solution NEVER Use Large Outdoor Fountains 515203276616.jpg Some people opt for putting bleach into the water, but the problem is that it harms wildlife - so it should be avoided.

Experts advise that the typical garden fountain undergoes a thorough cleaning every three-four months. Before you can start cleaning it you need to drain out all of the water. Then use a soft rag and gentle cleanser to scrub the inside. Feel free to use a toothbrush if necessary for any tiny crevasses. Do not leave any soap residue inside of or on the fountain.

It is highly recommended taking the pump apart to better clean the inside and remove any plankton or calcium. You might want to let it soak in vinegar for a few hours to make it easier to scrub. If you want to minimize build-up in your fountain, use rain water or mineral water versus tap water, as these don’t contain any components that might stick to the inside of the pump.

Lastly, make sure your fountain is always full by looking at it every day - this will keep it in tip-top shape. Allowing the water to drop below the pump’s intake level, can cause major damage and even make the pump burn out - an undesired outcome!

Fountains for Compact Spaces Since water makes a reflection, smaller spaces will appear bigger.Dark materials alter the refractive properties of a fountain or water feature.If your objective is to showcase your new feature at night, underwater lights in varied colors and shapes will do the trick.... read more


Statuary As a Staple of Classic Art in Historic Greece The first freestanding sculpture was designed by the Archaic Greeks, a recognized accomplishment since until then the sole carvings in existence were reliefs cut into walls and columns.... read more


Water Delivery Solutions in Early Rome Rome’s 1st elevated aqueduct, Aqua Anio Vetus, was built in 273 BC; before that, people residing at higher elevations had to depend on natural springs for their water.... read more


Classic Greece: The Origins of Outdoor Statue Design In the past, the vast majority of sculptors were compensated by the temples to embellish the involved pillars and archways with renderings of the gods, however as the era came to a close it became more accepted for sculptors to present regular people as well because many Greeks had begun to think of their institution as superstitious rather than sacred.... read more